Chantier d'enduit superficiel réussi avec une émulsion de Redicote® C-580 à Mt Pleasant, Michigan (USA)
Ce cas d'étude décrit l'emploi d'un émulsifiant liquide viscosifiant, économique et facile d'emploi pour émulsion cationique à rupture rapide (Redicote® C-580 de Nouryon) pour la réalisation d'enduit superficiel.
Chip seals and surface dressings
Chip seal or surface dressing is one of the most prevalent surface treatment/preventive maintenance treatment using emulsions. The rapid set emulsions such as CRS-2 (Type 2 Cationic Rapid Set emulsion as specified in standard ASTM D2397 / D2397M) or CRS-2M, which is the polymer modified version of CRS-2, need to have a certain higher viscosity to meet the specifications for this application. This viscosity specification is harder to meet with certain asphalt binders especially during recent times when properties of asphalt binder are changing. In order to meet this viscosity specification emulsion producer needs to use a higher binder content in the emulsion which adds significant cost. Over the years, a few viscosity building CRS emulsifiers have been introduced for this application but still there was a need for liquid easy to use product that builds viscosity. In April 2021, Nouryon launched Redicote® C-580 which is a cost effective, liquid easy to use CRS emulsifiers.
Inscription requise !
Vous devez vous identifier pour lire l'intégralité de la note technique
Identifiez-vous Créez un compte
Nouryon
RoadMat, "Successful field application with Redicote C-580 emulsion at Mt Pleasant, Michigan (USA)", RoadMat Case Study 2, 2022, published Dec 23, 2022
Cette note a été écrite en toute bonne foi, en cherchant à être à la fois exact et actuel. Toute personne décidant d'utiliser ces informations pour quelque usage que ce soit, le fait sous sa propre responsabilité et à ses propres risques. Veuillez prendre connaissances des Conditions Générales de notre site (https://www.roadmat.com/fr/page/legal/view.html).